           |
Sullair Products
Air Compressors
125
Portable Air Compressor
The Sullair 125 Portable Air Compressor, 125 CFM at 100 PSIG, 59 L/S
at 7 BAR.
Contact or visit store to purchase!
130 Portable Air Compressor
The Sullair 130 Portable Air Compressor, 130 CFM at 100 PSIG, 61 L/S
at 7 BAR.
Contact or visit store to purchase!
185 Portable Air Compressor
The Sullair 185 Portable Air Compressor, 185 CM at 100 PSIG, 87 L/S
at 7 BAR.
Contact or visit store to purchase!
375 Portable Air Compressor
The Sullair 375 Portable Air Compressor, 375 CFM at 100 PSIG, 177
L/S at 7 BAR.
Contact or visit store to purchase!
750 Portable Air Compressor
The Sullair 750 Portable Air Compressor,
750 CFM at 125 PSIG, 354 L/S at 8.5 BAR.
Contact or visit store to purchase!
900 Portable Air Compressor
The Sullair 900 Portable Air Compressor, 900 CFM at 100
PSIG, 425 L/S at 7 BAR.
Contact or visit store to purchase!
1050 Portable Air Compressor
The Sullair 1050 Portable Air Compressor,
1050 CFM at 100 PSIG, 496 L/S at 7 BAR.
Contact or visit store to purchase!
1600 Portable Air Compressor
The Sullair 1600 Portable Air Compressor,
1600 CFM at 100 PSIG, 755 L/S at 7 BAR.
Contact or visit store to purchase!
1900 Portable Air Compressor
The Sullair 1900 Portable Air Compressor,
1900 CFM at 100 PSIG, 897 L/S at 7 BAR.
Contact or visit store to purchase!
Paving Breakers
A leak-proof air cushion forms at the end of the piston stroke and stops the piston from direct impact when the tool is not breaking. The elimination of side rods, nuts and springs makes Sullair breakers sleeker and more comfortable to operate.
Standardization of design permits a high degree of interchangeability of parts between Sullair models.
The direct impact piston design, non-corrosive automatic valve and one-piece housing dramatically reduce air consumption. You can operate more tools from a single compressor. For example, a 125 cfm compressor will operate two MPB 90 breakers from one compressor.
Contact or visit store to purchase!
Rock Drills
The single throttle lever controls all tool functions from off, to blowing only, to progressive drilling speeds.
The unique design of the Sullair drills eliminates many high wear parts. This means less loss of power due to wear, less downtime to replace worn parts and lower overall maintenance costs.
With only two parts moving during operation, a non-corrosive automatic valve, less radial piston movement and high tech alloys, the Sullair drills do not require special rock drill oil. Normal oil carry-over from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions.
Contact or visit store to purchase!
Chipping Hammers
The strong “D” configuration is large enough to provide a comfortable, sure grip, even for a gloved hand.
The Sullair chipping hammer is available in 2", 3" and 4" strokes with either .680 round or .580 hex bushings.
Oval collar retainers are included as standard. Optional retainers available are universal ball type, round collar, or quick change segment retainers.
Two air inlet bushings are furnished: 3/8" NPT and 7/8-24, internal thread. The bushings provide for versatile hose connections while protecting the handle inlet threads.
Contact or visit store to purchase!
Backfill Tamper
MBT-6 Backfill Tamper
The Sullair tampers are the ideal tools for compacting backfill around utility poles, foundations and other structures. It quickly and efficiently compacts backfill soil excavated to perform service line repair before patching the pavement.
With design features and premium materials, normal oil carry-over from the compressor, combined with the moisture in the air, will supply sufficient under normal operating conditions.
Contact or visit store to purchase!
Air Pump Hoses
